Accessories
Never leave a job half done. HTC provides you with the accessories that make your customer satisfied. Most accessories are developed to help produce the best result. HTC provides you with different kinds of chemicals and matching polishing pads.


The simplest system for achieving completely level floors
HTC ALL System stands for "Automatic Levelling Laser System• which automatically grinds all large floor surfaces completely level. HTC ALL system is an accessory for HTC 950 RX consisting of a rotation laser and a receiver mounted on the grinding machine. The system automatically controls the grinding machine•s effect during grinding.

   • Level floor in an easy way
   • Extremely time saving
   • Replaces float finishing
   • Environmentally friendly because top coating is
     not necessary
   • Incredibly cost effective
   • Perfect for high bay storage

   



Mist Cooler System
Up to 100% increased cutting rate
The patent pending Mist Cooler System increases the grinding efficiency and the cutting rate increases up to 100%. The unique system consists of a pump and a nozzle. The nozzle sprays a superfine mist at the concrete surface. This chills the diamond tools and it•s easier to grind hard concrete and avoiding •glazing•.

Benefits:
• The cutting rate increases up to 100%
• Minimized risk of glazing
• The tools get more efficient
• The tooling choice is less critical

The Mist Cooler System is standard on all:
HTC 2500 iX, HTC 1500 ixT, HTC 650 RX and optional on HTC 950 RX, HTC 800 HDX and HTC 650 HDX.

 
     
  Chemicals  
     
 

HTC Cure
HTC Cure is used to seal the pores of the concrete and strengthen it when grinding with HTC Superfloor•.

 

HTC Cleaner
Special soap for daily cleaning of HTC Superfloor•.

 

HTC Joint Repair
Flexible polymer cement for joint filling and repairing damaged joints.

   
HTC Filler
Flexible polymer cement filler for covering pores and fixing shrinkage cracks.
   
HTC Concrete Repair
HTC Concrete Repair is used for filling thin trim lines (0.5-3 mm) as well as repairing more serious damages, cracks and cavities.
 

HTC Grouting
A product used to fill pores and cracks and is used during the HTC Superfloor• process to satisfy high demands for pore free and homogeneous floors.

 

HTC Stain Protection
Is a solution based special product for impregnation and sealing of all natural stone, terrazzo and concrete floors. Provides a water and oil resistant surface.

 

HTC Stain Protection Ceramic
Is a solution based special product for impregnation and sealing of unglazed ceramic tiles. Provides a water and oil resistant surface.

   
HTC Stain Protection Primer
This product is used as the first treatment before HTC Stain Protection, when the smallest change in surface colour is achieved.
 

MPC
Polishing compound for marble and terrazzo floors.

 

Granite Powder
Combined with granite spray for polishing granite floors.

 

Granite Spray
Combined with granite powder for polishing granite floors.

   
Coor Base
Use for crystallisation of marble and terrazzo.
 
             
  Pads and Brushes  
             
 

Polishing pads
For polishing marble, limestone and terrazzo.

 

Stainless steel
wool pad
For polishing granite.

     
             
  Tool Holders  
 

Tool holder EZ 180 3: Fixed tool holder for 3 EZchange• tools. Use with T-Rex• tools or for coarse grinding.

   
Tool holder elastic 180 3: Elastic tool holder for 3 EZchange• tools. Use for fine grinding or polishing.
   
Tool holder EZ 230 3: Fixed tool holder for 3 EZchange• tools. Use with T-Rex• tools or for coarse grinding.
   
Tool holder EZ 230 6: Fixed tool holder for 6 EZchange• tools. Use with T-Rex• tools or for coarse grinding.
   
Tool holder elastic 230 3: Elastic tool holder for 3 EZchange• tools. Use for fine grinding or polishing.
 

Tool holder EZ 270 3: Fixed tool holder for 3 EZchange• tools. Use with T-Rex• tools or for coarse grinding..

   
Tool holder EZ 270 6: Fixed tool holder for 6 EZchange• tools. Use with T-Rex• tools or for coarse grinding.
   
Tool holder flex EZ 270: Flexible tool holder for 6 EZchange• tools. Use for fine grinding or polishing.
   
Tool holder EZ 400 9: Fixed tool holder for 9 EZchange• tools for HTC 400.
   
Pad holder HTC 420: Holder for cleaning and maintenance pads.
 

Pad holder:
Holder for cleaning and maintenance pads. Comes in 230 mm and 270 mm.

   
Tool holder, wood sanding, HTC 420:
Holder for sandpaper and foamflex for wood sanding.
   
Tool holder HTC 420:
Holder for diamond tools in the FP series.
   
Tool holder FP 60 mm: Holder for diamond tools in the FP series.
 
             
  Other  
             
 

FSC 2000 Print
Slip tester, interchangeable pads, prints test results and comes in a practical case.

   
Glosschecker
Measures gloss.
   
HTC hose holder kit
Suits HTC 500 S/E, HTC 650 S/E and HTC 800E/ HD, The kit is available in two models, 50 mm or 76 mm, depending on what suction diameter is needed between suction and machine.
 

Filtering half-mask FFP3: Protects you in the event of exposure to hazardous fine dust and smoke. The design of the mask makes it easy and pleasant to wear. The mask has a exhale valve. It is sold in multi-packs.

   
Powered respiratory kit: The mask can be easily adjusted to fit four areas of your face. The fan has a high air flow, ergonomic design, is easy to control and has the latest battery technology. The battery has a service life of up to 13 hours.
 

HTC splashguards
Available in suitable lengths for all our grinders.
NOTE: With EZchange, you need to use a higher splashguard.

   
   
HTC vacuum cap
Effectively seals the cover if you have only connected wet or dry suction to one suction pipe.
   
HTC toolbox
Keep your sets of diamond tools in order with our practical and spacious toolbox. Available for HTC 420, 500-650, 800 and EZchange manufactured in wood with reinforced metal edges.
 
 

Website developed by: 9997.454